切削工具

切削刀具；割削工具

cutting tools───[机]切削工具；剪刀；割削工具

cutting oil───[机]切削油；冷却润滑油

cutting room───（电影）剪接室

cucking stool───n.马桶椅，浸水刑凳

cutting rooms───（电影）剪接室

cutting down───研磨修整

cutting off───切断

cutting oils───切削油

cutting out───切牌决定出局者

Choose the suitable cutting tools from the cutting tool storehouse.───从刀具库中选择适当的刀具.

For surfacing welding on cold die and cutting tool.───冷冲模及切削刀具的堆焊.

Danny: By moving a cutting tool against a rotating workpiece.───丹尼：通过将切割刀具移近旋转的工件。

can not directly observe the cutting tool.───不能直接观察到刀具的切削情况。

Tool wear resulted in increased cutting tool forces and machined surface temperature.───刀具磨损造成更多的部队和刀具加工表面温度.

The cutting tool works by moving the metal under a fixed laser.───切割工具是通过移动金属到固定的激光下工作的.

Die - cutting tool version by chemical etching and mechanical engraving made by.───模切 刀版利用化学腐蚀法和机械雕刻法制作而成.

Batteries also power the alternative annular cutting tool pipe severance method.───蓄电池也为备用环空切割工具管分离方法提供了电源.

The geometry of the cutting tool depends upon its intended function.───刀具的形状取决于它需要的功能.

A fine - grained whetstone for giving a keen edge a cutting tool.───人能用青铜做成一种刃口锋利的切削工具.

Magnetic - cutting roller and overall - cutting roller is Rotary die - cutting tool with two forms.───磁性 模切 辊和整体 模切 辊是圆压圆 模切 刀具的两种形式.

Strength in cutting - tool material is not always proportional to hardness.───切削刀具材料的强度并不都是与硬度成正比的.

Designed for different thickness of paper you should choose different die - cutting tool.───针对不同厚度的纸张应选择不同的 模切 刀.

Tommy : This is a cutting tool and that is a workpiece.───这是切割工具,那是工件.

Graver: V - shaped steel cutting tool used by engravers . Also called burin.───雕刻刀: 雕刻铜版用的槽形钢刀.

At last, an optimal example for a boring cutting tool is presented.───最后, 给出了优化计算实例.

The molten lead - free alloy , liquid cooled gussasphalt becomes a die - cutting tool.───再将熔化的铅合金液浇注进去, 冷却后即成为一块 模切 刀版.

wear and rupture of cutting tool are investigated.───切削硬岩时的刀具磨损和破损特征。

At last, an optimal example for a boring cutting tool is presented.

For surfacing welding on cold die and cutting tool.

When is use cutting tool , make sure the cutting line to be exactly and safe warning.

From archaeological evidence we can reasonably infer that these people used stone cutting tools.

The stresses of orthogonal cutting tool are estimated by using FEM.

For ceramic cutting tool materials are also evaluated.

Rotary's die cutting tool like printing plate cylinder, vertical alignment adjustment can be carried out.

The concept of cutting tool life-cycle management was put forward, and divided it into four phases: planning period, input time, serviceable life and discarding period.

Choose the suitable cutting tools from the cutting tool storehouse.

• cutting in line
• cutting paper
• cutting horse
• cutting tool
• cutting up